Hydraulic Butt Fusion Machine V500 200MM-500MM (8" IPS -20'' IPS) | Plastic fusion machine manufacturer
Hydraulic Butt Fusion Machine V500 200MM-500MM (8
Hydraulic Butt Fusion Machine V500 200MM-500MM (8
Hydraulic Butt Fusion Machine V500 200MM-500MM (8
Hydraulic Butt Fusion Machine V500 200MM-500MM (8
Hydraulic Butt Fusion Machine V500 200MM-500MM (8
Model
V500

Item specifics

Certificate
CE, ISO9001
Packing Material
Plywood Box
MOQ
1set
Working Range in MM
200mm - 500mm
Working Range in Inch
8 - 20Inch
Working Pressure Range
0 - 120Bar

Product review

Description

Hydraulic Butt Fusion Machine V500 200MM-500MM (8" IPS -20'' IPS)
V500 is an on-site hdpe plastic welding machine suitable for welding plastic pipe and fittings made of HDPE, PP, PVDF, and other thermoplastics material. 

The machine is used to butt weld pipe and fittings such as elbow, tees, wye, and flange necks without any additional equipment by simply adjusting the clamps and drag bar.
Product Details
WELDING RANGE O.D.
200MM - 500MM
PISTON AREA
23.06 CM²
POWER SUPPLY
380V±10%, 50/60HZ
TEMPERATURE RANGE
MAX. 320ºC
HEATER POWER
7.3KW
PACKING DIMENSION
1580*1000*960 MM
TRIMMER POWER
1.5KW
1030*680*1200 MM
PUMP POWER
1.5KW
800*350*400 MM
WORKING PRESSURE RANGE
0 - 120 BAR
GROSS WEIGHT
611KGS
Basic Frame

Featured by

- Oil seal kit, origins from Germany, make sure that the pressure performance stays in a more stable way.

- 4sets quick coupling helps the operator to prepare the machine better before and after welding, and we use STUCCHI which from Italy ensures no hydraulic oil leakages when unplugging or plugin.

- Using an integral shaft (top chromate treatment) instead of the assembled shaft, ensure the chassis strength to avoid possible frame twist or deform when dragging the pipe with extreme parameters.
Heating Plate

Featured by

- We use Dupont from the USA for coating the heating plate, which is the best in the industry. It's many stickers on an aluminum plate, more non-sticky to plastic pipes surface. The temperature deviation of different points on the heating plate is 2-3 degrees (small size machine) and 5-6 degrees (big size machine). 

Trimmer

Featured by

- High-quality drill, which can do 220V, 3phase as an option.

Electrical box Assy.

Featured by

- Temperature-controlled switch when the temperature-controlled switch is off, all the aviation plugs are not live, even the power cable connected with the power source. It is quote safe to connect or disconnect the plugs before or after welding.

- Very well-connected wires and a more reasonable layout. Each wire is marked with the corresponding numbers, thus giving more convenience to do the troubleshooting when a failure happens.

Support

Featured by

- Ergonomic design
Hydraulic Power Station

Featured by

- Solid relays have a bigger load capacity and working in a more stable situation, which has a much longer life.

- The circuit breaker works with an electricity leakage protection switch. Including the earth wires, there're 2 elements to activate the protection when electricity is leaking.

- Non-fan motor (small size machines), waterproof, sand-proof, and dust-proof at a higher level. The motor provides sufficient/full power to provide support for hydraulic power.

Data Logger
Aluminum Stub End Holder
Roller Support
Inserts